Scoprite quando scegliere un forno a rifusione ad alta capacità o uno entry-level, come influisce sulla produttività e sulla qualità SMT e come le scaffalature a filo intelligenti mantengono costante il flusso di materiale.
When you build or upgrade an SMT line, the reflow oven is usually the big beast in the middle.
Pick it wrong, and the whole line choke. Pick it well, and everything flow smooth.
At the same time, you also thinking about storage, cold room, walk-in freezer, scaffalature in filo metallico, FIFO and so on. The SMT line and the warehouse are not two worlds. They are one system. That’s exactly where a custom factory partner like QIAO comes in: reflow side needs stable flow, storage side needs solid Scaffalature metalliche multistrato per celle frigorifere e Scaffalature a filo per congelatori walk-in to keep material under control.
Let’s break the reflow part down in simple, real-factory language.
The first question is very boring but very real: how many boards per hour you need?
You can think it like this:
If your planner always complaining “line is blocked at reflow,” that’s a clear red flag. Time to look at a bigger gun.
Next thing: how many heating zones you really need.
Why this matter:
With more zones, you can tune one area without completely messing the others.
With short oven and few zones, you sometimes feel: “I fix the soak but now peak is wrong again.”
In many small lines, the operator still push racks, check boards by eye, change recipe by feeling.
That can work for proto. It doesn’t scale.
Entry-level reflow oven usually gives you:
High-capacity reflow oven is more like a real process center:
When you try to balance line, you also look at:
If oven can’t reach target conveyor speed without killing the profile, you will always fight with “fake OEE”. The number looks okay on paper, but operators are stopping all the time.
Many bosses worry:
“Big oven sure eat a lot power, right?”
Yes and no.
You don’t need to write full cost model in your blog. Just make one clear point:
“If you only reflow a few panels each shift, small oven is more sensible.
If you run heavy volume, high-capacity oven usually wins on cost per good board in the long run.”
Even with some grammar broken, the idea is crystal.
Oven choice is not only about “hot” side. It also touches layout, logistics, e storage.
High-capacity ovens are:
So planner must think:
Here your scaffalature in filo metallico actually plays big role:
When you work with QIAO on custom wire shelving, you don’t just buy “racks”.
You match shelf size to:
Cooling side and heating side become one clean system, not two random islands.
Let’s be fair. Not every factory need a monster oven. Entry-level unit is a good pick when:
In this stage, it’s smarter to:
Later, when you grow, you can move this oven to NPI line.
High-capacity oven becomes very logical when:
In this case, a high-capacity oven plus a more lean factory layout (including proper cold storage room shelves, walk-in freezer shelves, staging racks by QIAO) will:
Here the question changes from “Can we afford it?” to “Can we afford not to upgrade?”
| Criteria | Entry-Level Reflow Oven | High-Capacity Reflow Oven |
|---|---|---|
| Typical Production Volume | Low volume, proto, NPI | Medium to high volume, mass production |
| Product Mix | Very high mix, many changeovers | Fewer models or grouped by family |
| Heating Zones | Around 4–6 zones | Around 8–10+ zones |
| Profile Flexibility | Basic, enough for simple boards | High, good for complex and power boards |
| Automation & Data | Simple HMI, limited logging | Advanced recipes, curve data, MES link possible |
| Line Bottleneck Risk | Often okay for slow lines | Designed to keep up with fast P&P |
| Ideal Use Case | Start-up EMS, lab, R&D line | Main production line, 24/7 operation |
If you walk through these questions honestly, the answer “entry-level or high-capacity reflow oven” usually becomes quite clear. And your wire shelving, cold storage, and freezer layout will also fall into place, not just “some racks put somewhere”.
