Keep AOI and SPI in peak condition with practical checks, calibration triggers, and data rules. Reduce false calls, catch drift early, and stabilize SMT output.
Se construir componentes do congelador and refrigeration assemblies, you already know this pain: you can ship a part that looks perfect, and it still causes a headache later. The finish is clean. The welds are neat. The unit passes a quick bench test. Then the freezer goes into a harsh, cold, wet life… and the service tickets start.
AOI (Automated Optical Inspection) and SPI (Solder Paste Inspection) help you stop those issues early. But only if you keep the systems healthy. If you treat AOI/SPI like “set it and forget it,” they slowly drift. Then you get two bad outcomes:
This article breaks down practical habits to keep AOI and SPI sharp, with shop-floor scenes you’ve probably lived.
Freezer control boards live in a rough world. You get vibration from compressors. You get moisture risks. You get big temperature swings. Even a small solder issue can turn into a “why is this unit cycling weird?” call.
AOI checks things like polarity, missing parts, tombstones, lifted leads, and solder joint shape. SPI checks paste volume, height, area, and offset before the oven even starts. In simple words: SPI prevents bad solder from being borne AOI catches what still slips through.
Here’s the trap: both tools “see” through cameras, lighting, and algorithms. If any of those drift, the tool still runs… but it tells lies.
People love to say “we already tuned that program.” Yeah… last month.
These are common drift triggers:
And in freezer manufacturing, a small miss can show up later as field issues. Nobody wants that call on a Friday night.
You don’t need a fancy plan. You need a boring one that people will do.
Do these at shift start:
If the image looks off, don’t “hope it’s fine.” It’s never fine.
Once a week, pick one slot and do:
This is like checking tire pressure. Boring, but it keeps you out of trouble.
SPI is sensitive. That’s the point. But it also means calibration matters more than people admit.
Key SPI items to watch:
If you see sudden paste volume “trends,” don’t just tighten the spec window. Find the root. Otherwise you’re basically hiding smoke with a fan.
AOI lives or dies by lighting. A slightly dim ring light can turn a good solder fillet into a “suspect” shape.
Common AOI mistakes:
One real scene: a team kept seeing “bridging” calls on a fine-pitch part. They chased paste, stencil, oven, operator handling. The real cause? A light angle shifted after a maintenance task. The image got a bright streak, and the algorithm panicked.
Fix the lighting, the “defects” vanish. Everybody looks smart. But it was just optics.
AOI/SPI programs grow messy when people edit them like a spreadsheet.
Better practice:
You don’t need to be dramatic. You just need to prevent silent changes that nobody remembers.
Here’s a practical way to think about it:
| Issue Type | What SPI Catches Best | What AOI Catches Best | Common Root Cause | Best Fix |
|---|---|---|---|---|
| Insufficient solder | Low volume / height | Sometimes, but late | Stencil clog, paste dry | Clean stencil, check paste life |
| Tombamento | Paste imbalance | Part standing up | Uneven paste, placement | Tune stencil apertures + placement |
| Bridging | Paste spread / offset | Solder bridge visible | Too much paste, glare | Tighten paste + fix lighting |
| Missing component | Not applicable | Strong | Feeder / nozzle issue | Feeder check + AOI library |
| Polarity error | Not applicable | Strong | Setup mistake | Better kitting + AOI rule |
| Lifted lead | Not direct | Strong if lighting good | Warpage, reflow profile | Profile + support tooling |
The table looks clean, but real life isn’t. Still, it helps you decide what to fix first.
Here’s where it ties back to your business.
Freezer assemblies aren’t only electronics. They’re also baskets, racks, dividers, rear mesh, and the “boring” wire parts that hold everything in place. And buyers judge you on the whole package. One weak link ruins trust.
É por isso que WireShelvingMFG doesn’t just talk about quality. The brand has to prove it in repeatable process.
When you hold tight AOI/SPI control, you reduce surprises. That helps the whole supply chain stay calm.
Also, if you offer corrosion-resistant finishes on wire parts, buyers often expect the same “no surprises” mindset on electronics and assembly. They may not say it out loud, but they feel it.
This is the part many teams skip: AOI/SPI health depends on people behavior.
Two quick wins:
If you don’t do this, you get the classic loop: the system starts throwing calls, operators get annoyed, they override more, then you lose trust in the tool. After that, AOI becomes a fancy camera.
Here’s a no-drama schedule:
Do this and you’ll see fewer “mystery” issues.
And yes, Cold storage builds punish weak process. The line that “usually works” isn’t good enough when the unit runs 24/7.
Keeping AOI and SPI in peak condition isn’t magic. It’s routine. It’s cleaning, calibration, and program control. It’s also small habits that stop drift before drift turns into scrap, rework, and customer pain.
If you do one thing this week, do this: run a golden sample and realmente look at the image. If it looks weird, don’t ignore it. Fix it fast. Your future self will thank you, for real.
Product line reference: https://wireshelvingmfg.com/freezer-components/
